BECOME A PRO
HVAC

The Ultimate Guide On AC Fan Motor Replacement


Air conditioner fan motor replacement

Air conditioner fan motor replacement might be the solution if your air conditioner is not providing cool air or if you notice unusual noises coming from it as the motor powers the fans in air conditioning units, HVAC systems, and other cooling devices.

An AC fan motor converts the electrical energy into the mechanical energy that is used to turn the fan blades and create airflow, therefore it is important to keep yours in good working order. 

Like any other mechanical component, the AC fan motors can wear out over time and require maintenance or replacement. Common issues include worn bearings, damaged windings, or dirty or clogged fan blades.

This article has everything you need to know about AC unit fan motor replacement, including how to replace it and whether you can run the AC without it. Read on!

How To Replace AC Fan Motor

Replace ac fan motor

Replacing an AC fan motor is a complex task that requires some knowledge and experience. Here are the basic steps to follow.

  1. Turn off the power supply to the air conditioner. You can do this by turning off the circuit breaker that controls the AC unit.
  2. Access the motor by removing the access panel on the side of the air conditioner unit. The motor is usually located near the bottom of the unit.
  3. Disconnect the wiring from the motor. Be sure to take a picture of the wiring or label the wires to ensure proper reconnection later.
  4. Remove the motor by unscrewing it from the mounting bracket.
  5. Install the new motor in the same position as the old one and reattach the wiring.
  6. Turn on the power supply and test the AC to ensure that it is running smoothly and the new motor is working correctly.

With all these 6 tips you will be able to have a new AC fan motor placed in your system, allowing it to work properly, but if the AC thermostat is not working all right, the issue is not that.

How Do You Know If Your AC Fan Motor Is Bad?

AC fan motor is bad

If you suspect your AC fan motor is not doing well, pay attention to see if the AC is making noises and check its smell or unusual temperatures. You may notice the following symptoms:

  • loud noises – grinding, rattling, or buzzing sounds coming from your AC unit could be a sign that the fan motor is bad;
  • no cool air – if your air conditioner is not providing cool air, it could be due to a faulty fan motor;
  • overheating – an AC unit overheating may be caused because the fan motor is not working correctly; or
  • burning smell – might be a sign that the fan motor is overheating and needs to be replaced.

Have you noticed any of these signs? It might be time to do an AC fan motor repair or replacement.

How Long Does It Take To Replace AC Fan Motor?

How long take replace ac fan motor

On average, it takes between 2 to 4 hours to replace an air conditioner fan motor. However, it may take longer than that if there are any complications.

But the time it takes to replace an AC fan motor also depends on various factors, such as the size and complexity of the AC unit and the experience level of the person doing the job. Just do not run your equipment without one.

Can You Run An AC Without A Fan Motor?

No, it's not safe to run an air conditioner without a fan motor as the fan motor is responsible for moving air over the evaporator coil, which is essential for the cooling process. 

Without it, the evaporator coil can freeze, and the compressor can overheat, causing extensive damage to the AC unit. If you suspect that your fan motor is bad, it is crucial to replace it as soon as possible.

Replacing an AC fan motor is a complex task that requires technical knowledge and experience. Reach out for our excellent HVAC service available here!

Comments

Sign in with

or Pick a name

Be the first comment.

© 2024 eHARDHAT - All Rights Reserved.