Dealing with a leaky or broken PVC pipe repair can seem daunting for home repairs. You can fix it by cutting off the damaged section, deburring the pipe ends, measuring and cutting a new pipe segment, dry fitting the pipe, applying primer and cement, and holding until set.
While PVC pipes are durable and commonly used for plumbing, even the best systems can face wear and tear over time. In this guide, you will learn common PVC pipe repairs and how to handle leaks, breaks, and underground fixes. Start reading to become familiar!
How To Repair A PVC Pipe Leak? 5 Simple Steps!
If you notice water dripping from a PVC pipe, you are likely dealing with a small leak. To solve the problem, you must turn off the water, identify the leak, clean the pipe, apply PVC primer and cement, patch the leak, and test the repair.
- Shut off the water to avoid flooding or further damage.
- Pinpoint the exact location by drying the pipe and observing where the water appears.
- Use a rag to clean the area around the leak. Any dirt or debris can affect the repair.
- Once the pipe is dry, apply PVC primer around the leak, then follow up with PVC cement.
- For small cracks or pinhole leaks, use PVC pipe repair tape or putty for a quick fix; consider replacing the pipe section for larger leaks.
Remember, while patching a PVC pipe can temporarily solve the issue, it may not last forever. If you need frequent repairs, it might be time to replace the pipe—and that is when you call the pros!
How To Repair A Broken PVC Pipe?
Cracked PVC pipe repair requires a bit more effort than a simple leak, similar to a PEX pipe repair. To handle PVC pipe hole repair, you will need to cut off the damaged section, deburr the pipe ends, measure and cut a new pipe segment, dry fit the pipe, apply primer and cement, and hold until set.
Check out the details below!
- Remove the broken part of the pipe using a pipe cutter or a hacksaw to cut a straight line.
- Deburr the pipe ends with sandpaper or a deburring tool to smooth them out.
- Measure the section you removed and cut a new piece of PVC pipe to fit.
- Test fit the new pipe and any fittings (such as couplings or elbows) to ensure everything aligns perfectly.
- Coat both the new pipe ends and the fittings with PVC primer. Once it is dry, apply PVC cement and join the pieces together.
- Hold the pipe in place for about 30 seconds to ensure a secure bond.
An unrepaired broken pipe can cause serious damage! If you are not confident in your ability to complete this repair, our team of professionals can step in to get it done quickly and effectively.
How To Repair PVC Pipe In The Ground?
Fixing a PVC pipe underground presents unique challenges. Still, it is not impossible if you follow these steps: locate the leak, dig around the pipe, turn off the water supply, cut the damaged section, dry fit the replacement pipe, apple primer, and cement, and rebury the pipe!
Repairing underground PVC pipes is often more complicated than it seems, especially if the pipe is in a difficult-to-reach area. Hiring a professional can save you from unnecessary headaches and ensure the job is done correctly.
While DIY PVC pipe repairs can be manageable, some jobs are better left to the professionals. Whether it is a leaky pipe, a break, or an underground issue, eHARDHAT's expert plumbing team can handle it.
