The Ultimate HVAC Maintenance Checklist

The HVAC system is an integral part of any house. It’s designed to help you manage your indoor environment and as long as it’s working well, it will go a long way in making your home livable and comfortable. 

Despite this, 

The system isn’t 100% foolproof. Just like any other home-based appliance, it’s prone to damages, but the rate and the extent of it depend on how well the system is maintained. 

In fact, maintenance is a key part of keeping it working optimally, since it will reduce the instances of repairs and go a long way in enhancing the life of your system. 

In this post, we have prepared a comprehensive HVAC maintenance checklist that will keep your system working in good condition for a long time! 

Replace the Filters 

Filters are very important components of any ac system, and they should always be the first topic on a residential hvac maintenance checklist. They are designed to purify the air, making sure that dust and other impurities are not circulated with the rest of the air. 

According to the best HVAC contractors, these filters must be replaced every 90 days.

Remove the Debris on Your HVAC Unit 

Over time your entire system may be covered by debris. Things like leaves that fall on the unit or dust that accumulates must be removed as soon as possible. 

Ensure the unit is cleaned on a regular basis to increase efficiency and reduce the risk of damages.

Clean Up the Ducts

In case your system uses a duct network to supply air around the house, then you need to make sure that they are cleaned well enough. Dust and other impurities will build-up along the inner walls of the ducts contaminating the air supply, lowering your indoor air quality and increasing allergies.

Ducts should ideally be cleaned at least once every three months. If you have pets or perhaps you live in an area with loads of dust, consider doing it more regularly than that.

Replace the Batteries in Carbon Detectors 

CO is one of the most toxic gases inside a house, and since it’s hard to detect, carbon monoxide detectors are very important safety accessories. They are innovative technologies that will detect this deadly gas before it causes any harm. 

But if the batteries are not working, then the detectors become useless. This is not a risk you want to take. In that case, always replace the batteries in the detectors regularly to avoid any surprises.

Clear the Drain Pans 

It's also important to inspect the drain pan regularly and ensure the water is drained. This will help reduce any risk of overflow. 

Inspect the drain line while you’re at it as well and remove any clogs that could be there. This goes a long way in enhancing the overall efficiency of your system.

Assess Efficiency

The last thing you want as a homeowner is to end up spending a lot of money on heating or cooling. The good news is that you can avoid this by scheduling an efficiency test with a local HVAC contractor

The inspection helps identify areas that can be improved for better efficiency. Eventually, your system will deliver the required heating and cooling without necessarily using loads of energy.

Inspect the Insulation 

The insulation is also very important in enhancing the efficiency of your AC system. You need to inspect it and make sure it’s working well. The insulation along the refrigerant line, in particular, should be highly prioritized during inspections.

Keeping the HVAC system working and in good condition is a huge priority for many homeowners. The good news is that it only takes small routine maintenance checks to optimize the performance of your system. 

Contact a local contractor to do this HVAC checklist in your home and save money on your energy bills! 


Sign in with

or Pick a name

Be the first comment.

© 2020 eHARDHAT - All Rights Reserved.